Mercusys MS105G vs TP-Link TL-SG1005D
The two products' specifications row by row. Rows where they differ are marked; a missing value is unknown, never equal.
| Specification | Mercusys MS105G | TP-Link TL-SG1005D |
|---|---|---|
| Networking standardsDiffers | IEEE 802.3, IEEE 802.3u, IEEE 802.3x CSMA/CD | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x |
| Jumbo framesDiffers | 16 KB | 15000 |
| Store-and-forwardDiffers | Store and Forward | Yes |
| Supported data transfer ratesDiffers | 10/100/1000 Mbps | 10/100/1000 Mbit/s |
| Power sourceDiffers | 5V/0.6A | DC |
| Maximum data transfer rateDiffers | 2 Gbit/s | 1 Gbit/s |
| Switching capacitySame | 10 Gbit/s | 10 Gbit/s |
| Basic switching RJ-45 Ethernet ports quantitySame | 5 | 5 |
| Basic switching RJ-45 Ethernet ports typeSame | Gigabit Ethernet (10/100/1000) | Gigabit Ethernet (10/100/1000) |
| Rack mountingSame | No | No |
| Switch typeSame | Unmanaged | Unmanaged |
| Power over Ethernet (PoE)Same | No | No |
| 10G supportnot known | No | not known |
| Auto MDI/MDI-Xnot known | not known | Yes |
| Auto-negotiationnot known | not known | Yes |
| Flow control supportnot known | not known | Yes |
| Full duplexnot known | not known | Yes |
| Half duplexnot known | not known | Yes |
| MAC address auto-aging supportednot known | not known | Yes |
| MAC address auto-learning supportednot known | not known | Yes |
| Jumbo frames supportnot known | not known | Yes |
| MAC address tablenot known | not known | 8000 entries |
| Heat dissipationnot known | not known | 8.22 BTU/h |
| Operating relative humidity (H-H)not known | not known | 10 - 90% |
| Operating temperature (T-T)not known | not known | 0 - 40 °C |
| Storage relative humidity (H-H)not known | not known | 5 - 90% |
| Storage temperature (T-T)not known | not known | -40 - 70 °C |
| Gigabit Ethernet (copper) ports quantitynot known | not known | 5 |
| Installed SFP modules quantitynot known | 0 | not known |
| Power connectornot known | not known | DC-in jack |
| Input currentnot known | not known | 0.6 A |
| Input voltagenot known | not known | 9 V |
| Power consumption (max)not known | not known | 2.41 W |
| Depthnot known | not known | 108 mm |
| Heightnot known | not known | 28 mm |
| Widthnot known | not known | 165 mm |
| Stackablenot known | No | not known |
| LED indicatorsnot known | not known | Yes |
| Power supply includednot known | Yes | not known |
| Certificationnot known | CE, RoHS | not known |
| Compliance certificatesnot known | CE, RoHS | not known |
| (sg) Manufacturer Part Numbernot known | MS105G | not known |
| How to usenot known | Plug and play setup, no configuration required | not known |
| Link to manufacturer informationnot known | https://mercusys.com/en/product/switch/ms105g/v2 | not known |
| Sustainability compliancenot known | Yes | not known |
| Waste Electrical and Electronic Equipment (WEEE) compliancenot known | Yes | not known |
| Quick start guidenot known | not known | Yes |
| Package depthnot known | not known | 108 mm |
| Package heightnot known | not known | 85 mm |
| Package weightnot known | not known | 240 g |
| Package widthnot known | not known | 145 mm |