Mercusys MS105G vs TP-Link TL-SG1008D
The two products' specifications row by row. Rows where they differ are marked; a missing value is unknown, never equal.
| Specification | Mercusys MS105G | TP-Link TL-SG1008D |
|---|---|---|
| Jumbo framesDiffers | 16 KB | 15000 |
| Store-and-forwardDiffers | Store and Forward | Yes |
| Supported data transfer ratesDiffers | 10/100/1000 Mbps | 10/100/1000Mbps |
| Switching capacityDiffers | 10 Gbit/s | 16 Gbit/s |
| Networking standardsDiffers | IEEE 802.3, IEEE 802.3u, IEEE 802.3x CSMA/CD | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x |
| Basic switching RJ-45 Ethernet ports quantityDiffers | 5 | 8 |
| Basic switching RJ-45 Ethernet ports typeDiffers | Gigabit Ethernet (10/100/1000) | 10/100/1000Mbps |
| Power sourceDiffers | 5V/0.6A | DC |
| CertificationDiffers | CE, RoHS | CE, FCC, RoHS |
| Compliance certificatesDiffers | CE, RoHS | CE, Federal Communications Commission (FCC), RoHS |
| 10G supportSame | No | No |
| Rack mountingSame | No | No |
| StackableSame | No | No |
| Switch typeSame | Unmanaged | Unmanaged |
| Power over Ethernet (PoE)Same | No | No |
| Power supply includedSame | Yes | Yes |
| Sustainability complianceSame | Yes | Yes |
| Jumbo frames supportnot known | not known | Yes |
| MAC address tablenot known | not known | 4K |
| Packet buffer memorynot known | not known | 2 MB |
| Packet forwarding rate (100 Mbps)not known | not known | 148800 pps |
| Auto MDI/MDI-Xnot known | not known | Yes |
| Auto-negotiationnot known | not known | Yes |
| Cable types supportednot known | not known | Cat3, Cat4, Cat5, Cat5e |
| Copper ethernet cabling technologynot known | not known | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Flow control supportnot known | not known | Yes |
| Full duplexnot known | not known | Yes |
| Heat dissipationnot known | not known | 15.8 BTU/h |
| Operating relative humidity (H-H)not known | not known | 10 - 90% |
| Operating temperature (T-T)not known | not known | 0 - 40 °C |
| Storage relative humidity (H-H)not known | not known | 5 - 90% |
| Storage temperature (T-T)not known | not known | -40 - 70 °C |
| Gigabit Ethernet (copper) ports quantitynot known | not known | 8 |
| Installed SFP modules quantitynot known | 0 | not known |
| Power connectornot known | not known | DC-in jack |
| AC input frequencynot known | not known | 50/60 Hz |
| AC input voltagenot known | not known | 100 - 240 V |
| DC input voltagenot known | not known | 9 V |
| Input currentnot known | not known | 0.6 A |
| Housing materialnot known | not known | Plastic |
| Depthnot known | not known | 90 mm |
| Heightnot known | not known | 25.5 mm |
| Widthnot known | not known | 180 mm |
| LED indicatorsnot known | not known | Yes |
| Wall mountablenot known | not known | Yes |
| Fanlessnot known | not known | Yes |
| Maximum cable lengthnot known | not known | 100 m |
| Maximum data transfer ratenot known | 2 Gbit/s | not known |
| Dimensions (WxDxH)not known | not known | 180 x 90 x 26 mm |
| (sg) Manufacturer Part Numbernot known | MS105G | not known |
| How to usenot known | Plug and play setup, no configuration required | not known |
| Link to manufacturer informationnot known | https://mercusys.com/en/product/switch/ms105g/v2 | not known |
| Waste Electrical and Electronic Equipment (WEEE) compliancenot known | Yes | not known |
| AC adapter includednot known | not known | Yes |
| Cables includednot known | not known | AC |
| User guidenot known | not known | Yes |
| Package depthnot known | not known | 185 mm |
| Package heightnot known | not known | 85 mm |
| Package typenot known | not known | Box |
| Package weightnot known | not known | 300 g |
| Package widthnot known | not known | 110 mm |
| Harmonized System (HS) codenot known | not known | 85176990 |