Mercusys MS105G vs TP-Link TL-SG1016D
The two products' specifications row by row. Rows where they differ are marked; a missing value is unknown, never equal.
| Specification | Mercusys MS105G | TP-Link TL-SG1016D |
|---|---|---|
| Jumbo framesDiffers | 16 KB | 9000 |
| Store-and-forwardDiffers | Store and Forward | Yes |
| Supported data transfer ratesDiffers | 10/100/1000 Mbps | 10/100/1000Mbps |
| Switching capacityDiffers | 10 Gbit/s | 32Gbps |
| Networking standardsDiffers | IEEE 802.3, IEEE 802.3u, IEEE 802.3x CSMA/CD | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x |
| Basic switching RJ-45 Ethernet ports quantityDiffers | 5 | 16 |
| Rack mountingDiffers | No | Yes |
| CertificationDiffers | CE, RoHS | FCC, CE, RoHS |
| 10G supportSame | No | No |
| Basic switching RJ-45 Ethernet ports typeSame | Gigabit Ethernet (10/100/1000) | Gigabit Ethernet (10/100/1000) |
| Switch typeSame | Unmanaged | Unmanaged |
| Power over Ethernet (PoE)Same | No | No |
| Power supply includedSame | Yes | Yes |
| Sustainability complianceSame | Yes | Yes |
| Jumbo frames supportnot known | not known | Yes |
| MAC address tablenot known | not known | 8K |
| Number of queuesnot known | not known | 4 |
| Packet buffer memorynot known | not known | 0.5 MB |
| Throughputnot known | not known | 23.08 Mpps |
| Auto MDI/MDI-Xnot known | not known | Yes |
| Broadcast storm controlnot known | not known | Yes |
| Flow control supportnot known | not known | Yes |
| Full duplexnot known | not known | Yes |
| Operating relative humidity (H-H)not known | not known | 10 - 90% |
| Operating temperature (T-T)not known | not known | 0 - 40 °C |
| Storage relative humidity (H-H)not known | not known | 5 - 90% |
| Storage temperature (T-T)not known | not known | -40 - 70 °C |
| Installed SFP modules quantitynot known | 0 | not known |
| Power connectornot known | not known | DC-in jack |
| Quality of Service (QoS) supportnot known | not known | Yes |
| Switch layernot known | not known | L2 |
| AC input frequencynot known | not known | 50 - 60 Hz |
| AC input voltagenot known | not known | 100 - 240 V |
| Power sourcenot known | 5V/0.6A | not known |
| Depthnot known | not known | 180 mm |
| Heightnot known | not known | 44 mm |
| Widthnot known | not known | 294 mm |
| Stackablenot known | No | not known |
| Maximum data transfer ratenot known | 2 Gbit/s | not known |
| Rate limitingnot known | not known | Yes |
| Fanlessnot known | not known | Fanless |
| Maximum cable lengthnot known | not known | 100 m |
| LED indicatorsnot known | not known | Yes |
| IGMP snoopingnot known | not known | Yes |
| Compliance certificatesnot known | CE, RoHS | not known |
| (sg) Manufacturer Part Numbernot known | MS105G | not known |
| How to usenot known | Plug and play setup, no configuration required | not known |
| Link to manufacturer informationnot known | https://mercusys.com/en/product/switch/ms105g/v2 | not known |
| Waste Electrical and Electronic Equipment (WEEE) compliancenot known | Yes | not known |
| Cables includednot known | not known | AC |
| Rack mount kitnot known | not known | Yes |
| User guidenot known | not known | Yes |
| Harmonized System (HS) codenot known | not known | 85176990 |